Table of Contents
Just like the system refresh settings, NeoReader also provides some advanced settings, especially for reading documents. In this article, you will learn more about the Refresh Settings in NeoReader.
To go to the Refresh Settings in NeoReader, do the following:
- In NeoReader, tap the center area to display the main menu.
- Tap the hamburger menu in the top right corner and choose Refresh.
Page RefreshRefresh RateDeep Full-RefreshDrag to refreshApply to all documents
Here you can switch between Normal Mode, Regal Mode and Speed Mode. Please refer to the Refresh Modes page for more info of different Refresh Modes.
Here you can set the frequency to perform a full refresh based on your actions. The more taps you need, the more ghosting it will accumulate before a full refresh.
You can turn the Full-Refresh setting to Deep if you need cleaner display effects with minimal ghosting.
Here you can set the refresh method after dragging.
Here you can choose whether the refresh settings will apply to all documents or the current document.